How to Lay Laminate Flooring in Multiple Rooms

How to Lay Laminate Flooring in Multiple Rooms

Installing a laminate floor may seem easy for single room space. But even the experts can face problems when it comes to laying in multiple rooms.

You’ll need proper plans & time management to cover the entire house floor. Else, it’s not uncommon that your work comes to a halt over a surprising issue.

Both your time & effort are important when it’s about laying laminate properly. You should consider & therefore, handle the troubling factors.

Before getting started, it’s important to know about how to lay laminate flooring in multiple rooms.
That’s what we would like to discuss here is a simple yet effective detail.

How to lay laminate flooring in multiple rooms:

Choosing the Right Direction:

Apart from a better flooring base, laminate flooring can induce outstanding décor. Good directional placement can influence the unifying outlook.

You should consider laying all the flooring in the same direction. Not just one direction, you better have it placed in the best direction of the house.

Regarding the best direction, it primarily depends on the house shape. You can choose the parallel direction to the longer walls around.

Although this is not a strict rule for you to follow or even consider. For a longer hallway, you can take the short wall line for the laying direction.

One important fact to remember is the entrance sighting. It’s more pleasing to see laminate flooring parallel to the sightline in comparison to others.

Planning Transitions:

Most of the people choose to floor with transitions these days. When it comes to laminate flooring, some people even prefer it without transitions.

Laying the laminates with transition & without transition has its difference. You’ll need some extra preparation if you want to lay the floor without.

The same directional placement of laminates can give you a certain advantage. You’ll require no transitions in the cabinet or doorway portions.

The planks can approach the cabinet or doorway in either parallel or perpendicular position. It’s rather easy to notch the planks with the doorjambs.

For changing the direction, you better go for the transition strip. It helps you to change the direction in a more systematic way on the doorways.

Some make a huge mistake deciding to intersect the plank edges in multiple directions. Although it’s not impossible, it creates several difficulties for multi-room laying.

Using the Transition Strips:

Direct screwing of the strip to the subfloor gets the job done. With a transition strip, you can connect the laminate floor to metal tracks.

For perfect accommodation, the strips require some gap. The gap measures about 1-1/8 inches between two halves of each transition.

Before even you lay the floor, it actually lets you install the tracks. The provided gap also helps to maintain the right placement of the tracks.

Having the tracks installed, you can measure the cuts using a standard reference. Thus you can attain precise cutting & exact placement.

In case of the same thickness, you can go for T-molding for the planks. Meanwhile, a reducer strip can help you a lot to deal with different thicknesses.

Laying the Entire Floor:

Whenever you decided the plank direction, you basically considered the whole house as one large room. Still, the entire place has walls, doors & other obstructions.

Now you can start laying the laminate floors across the room. It’s better to start in the designated direction in accordance with the reference wall.

You can also proceed from the furthest corner or wall-side of the house. It continues for the entire first room until the edge gets extended beyond the walls.

The process continues straightforward into the neighboring rooms. You can call for directional change using the transition strip.

One vital point to remember is to cut the doorjamb using a suitable saw. Possible removal of the doors can ease your work without disruption.

How Long It Can Take:

Well, that’s quite uncertain to answer. The overall work can take a few days to a month, even more. There are lots of factors to consider presuming the exact time requirement.

The very first thing to concern is the size of the house. It’s actually the available size of the floors that require laminate flooring.

Another important thing, how long take to lay laminate flooring in multiple rooms, it mostly depends on your usage accessories & tools. Like, on your hand if have the best quality laminate flooring saw, you can ready or done your work more fastest.

Then, you’ll have to move towards the house shape. You need to determine the obstructions, longest wall & of course, the possible laying direction.

Efficiency is also important. By yourself, it is likely to take more than the anticipated time frame. Continuity of the operation also matters here.

It’s rather difficult to anticipate the required time without knowing the layout. Once you make the calculations & measurements, it can give you a somewhat close result.


Without a plan, you can’t expect to have a good output. That’s where the real importance of how to lay laminate flooring in multiple rooms lies.

Knowing the details, you can get a flow in the overall process for sure. It certainly eases the complications related to the entire house flooring.

Want to know everything there is to know about flooring? Check our complete guides.

Also, Read –

5/5 - (1 vote)
Spread the love