How to Use a Bandsaw Safely – Must Follow | Toolsadvisorpro

How to Use a Bandsaw Safely

A band saw is a primary staff in the home and workshops. Safety should be the first priority. That’s why you must know how to use a bandsaw safely.

Be familiar with the band saw before operating it. Your unconsciousness may turn the machine into a dangerous one. Having band saw techniques will help you to operate the machine smoothly.

To ensure your utmost safety, I have enlisted band saw safety features below. Go through the points eventually.

Precautions before using a band saw:

Choosing the right blade:

The blade is the most important staff in a band saw. The efficiency of the machine depends on the blade and the motor. You can use several blades in a band saw regarding your cutting object.

Choosing the right blade is a crucial section. Any wrong decision would cause an accident. The blade should not break while cutting. A breaking blade can be the most dangerous thing for you.

Take suggestions from the user manual and experts while choosing the blade. Learn how to change the blades. Ensure that you have adjusted the blade tightly.

Adjusting the vise and blade:

You will get the vise at the hole of the table. Vise helps to keep the object straight. You will find several screws under the vise.

Adjust the screws as per your need. The vise and the blade should have a suitable distance. Too much distance may cause a zigzag in the blade. Keep in mind that the blade does not touch the vise.

Tighten the guides:

Primarily, you will get 3 guides in a band saw. The guides are for two wheels and the blade. You can adjust the guide to tighten the screws.

The guides need lubrication to let the blade run smoothly. Remember, the guides are the savior for the operator. If anything happens like breaking blades, the guides will save you.

Run the band saw for a while and listen carefully. If you get any extra sounds from the guides or anything else, then you should tighten the screws.

Setting the exact speed:

Use the control panel to set a safe speed for the motor and the blade as well. The speed should meet the tenacity of the cutting object.

Too much speed may break the blade and ruin your time and money. When you are setting up the speed know the capacity of the blade and judge the object.

Try to use a moderate speed so that you can handle the situation. In the case of cutting metal objects, you may need to fix the speed at a higher level.

Arrange goggles:

Whenever you are going to operate a machine, you must wear goggles. Especially for band saws, you must put on goggles for the safety of your eyes.

Wooden objects create so much dust that you cannot see the operation. The tiny dust may harm your eyes badly. Find the goggles that can cover the areas of your eye side completely. It should not pass any dust to your eyes.

Wear a dust protector:

Wear a dust protector in your body. Try to use the thicker one. A thick dust protector can save you from dust and big objects as well.

Put on shoes:

Put on shoes to avoid any injuries to your feet. When you are cutting metal objects, you should be more serious. Tiny metal objects may bleed your feet. Try to wear a pair of shoes with a thick flat.

The band saw a safe operation procedure:

Know the machine:

The band saw is a machine. You must learn about the machine how a band saw works. You will find valuable information in the user manual.

Pay special attention in the assembly section. A band saw is a construction of several tools. You have to set every part eventually. Assemble every part following the user manual so that you can’t face any trouble.

Assembling can be a great part of learning the machine well.

Stand keeping a safe distance:

A machine can turn into a horrible thing if you don’t know how to operate a band saw. Although you have to run the saw manually, you must keep a suitable distance.

Suitable distance will help you to avoid dust and other risk factors from the blade.

Hold the object at a safe distance:

You must hold the cutting object in the right place. You will find how to hold the object in the user manual. Hold the object straight towards the blade.

You can set up the line before starting the motor. On the other hand, use a marker as the straight line that you have to follow during the cutting.

Moreover, you must mark the line in the object that you are going to cut. Follow the line to have a fine cut.

Don’t push the object too hard:

You should not panic while operating the band saw. Take suitable time. Make sure you have fixed the intensity and speed of the blade.

Hold the object smoothly and push it slowly towards the blade. Over-pressure may break the blade and cause a serious accident. You can feel the pressure of the blade while pushing the object.

Pay special attention while cutting wooden and metal objects. Wooden objects are thicker than mental objects. They may break the blade easily. Choose the right blade for the metal object.

Turn on the auto shut-down button:

You will find a turn-off button beneath the band saw. Turn it on so that it can shut down the motor while getting excessive pressure.

You can fix the pressure manually. The band saw will be turned off automatically while getting such conditions.

The band saw maintenance tips:

To operate the band saw in a safe way, you have to take care of the machine. A fit band saw can serve the ultimate outcomes.

  • Lubricant the wheels regularly.
  • Lubricate all the connections in the band saw.
  • Check out the electric lines carefully before every cut.
  • Sharpen the blade once a week or twice a month.
  • Clean up each part of the band saw after every cut.
  • Check out the fitness of the blade regularly.
  • Keep the area clean where you have installed the band saw.

Bottom line: Band saw safety tips will help you to operate the machine safely. You should ignore the mentioned point for the safety of your life. If you are a beginner, then you must be familiar with how to use a band saw safely.
Ensure the safety measures first before making a cut in the band saw. Make sure you are taking care of the band saw by following the band saw maintenance tips.

5/5 - (1 vote)
Spread the love